#Check 2012 mac pro for hardware issues upgrade#
#Check 2012 mac pro for hardware issues free#

So upon receiving your replacement, be sure to test it thoroughly, and then do so periodically to ensure it is working correctly. Most RAM manufacturers offer lifetime warranties for their products. If your Mac doesn’t support user-upgradable memory (the Retina MacBook Pro, say, or the MacBook Air), then you’ll need to contact an Apple technician.įinally, if you do replace your Mac’s RAM, be sure to keep the receipts, packaging, and other proofs of purchase for it. You can find that specific information in Apple’s support website, where it hosts an index of instructions for replacing RAM on your Mac. However, that’s not all information you need it’s missing things like pin counts. You can look up the type of RAM your system uses by choosing About This Mac from the Apple menu, where you should see the current RAM amount (8GB or 16GB, for example), its speed (1600MHz, say), and its type (DDR3 is one possibility).

#Check 2012 mac pro for hardware issues upgrade#

The About This Mac windows show you some memory information, but not all you need to upgrade or replace your RAM. If any of the tests you run returns any status except for OK, then you should consider replacing it as soon as possible. (The only other regular one which I recommend is to check your hard drive for formatting errors.) But this isn’t something you have to do regularly-perhaps once a year or even every few years, if you care to include it with regular system checks you perform on your Mac. Keep in mind that, depending on the amount of RAM you have installed, these tests will take some time to complete. This will help ensure that all RAM addresses are accessible to the testing program, because the system will load core OS components into different parts of RAM. Swap or rearrange RAM chips: If you have access to the RAM chips on your system, swap or rearrange them, especially if you have more than two available RAM slots (as you do on some iMac models and the Mac Pro), and then test again. That’s why Apple’s Hardware Test is a great option: it loads only a rudimentary operating system, which loads just the tests, ensuring that RAM isn’t occupied with anything else. This means, if you use Rember or memtest, to do it in Safe Mode (for anything requiring a graphic interface), or better yet, in Single User mode, as these will ensure as much RAM is available for testing as possible. Run in Safe Mode or Single User Mode: Since memory test programs can only test the RAM that is available, be sure to run it in as minimal of an operating system as possible. Therefore, I recommend you use more than one.Īpple’s new hardware test suite will run automatically and show you any results here.įor best results, you should run these RAM-testers under some special conditions:

Each will test memory differently and some may miss a problem that another can detect. But, as I say, there are many of them just check the Mac App Store and search for RAM. You can also get a graphical wrapper for memtest, called Rember.

#Check 2012 mac pro for hardware issues free#

One of the most popular is the free memtest, which is run from the Terminal command-line. In addition to Apple’s testing suite, there are plenty of third-party memory-testing utilities. If everything is OK, you’ll see a message that states all tests passed and no problems were found. If the hardware test finds any faulty memory, it will list the faulty memory addresses. Note that, if you have formatted your hard drive and reinstalled OS X, then the built-in hardware tests may have been wiped however, you can still load them from the Internet by holding the Option-D key combination (as opposed to just D) at startup when you hear the boot chimes. On newer Macs, the tests run automatically when the utility is invoked it appears with a gray background instead of blue.